Salisbury Garage 4.8m x 6.8m
- Thickness: 45mm-60mm
- Width: 4.80m
- Depth: 6.80m
- Ridge Height: 2.91m
- Eaves Height: 2.08m
Overview
The Salisbury Garage is the perfect fit for 2 small cars, most large cars or even a limousine. The garage features two large swing doors on the front wall with two windows along each side and one pedestrian door as its standard design.
The Salisbury Log Garage is perfectly sized for 2 small cars, and fully customisable. This means that extensive timber workshop you’ve wanted for so long, or that luxurious games room or spacious home office you’ve always secretly wanted is one step closer to becoming a reality.
Specification - Salisbury Log Garage |
|
Wall construction |
45 mm or 60mm double tongue & groove interlocking logs |
Base construction |
Tanalised bearers |
Front roof overhang |
0.50 m |
Glazing |
Single glazed windows & Single glazed door |
Garage Range |
||||||||
|
Cabin Dimensions (m) |
Doors (cm) |
Windows (cm) |
|||||
Width |
Depth |
Eaves |
Ridge |
Wall Thickness |
Access |
Garage |
||
Chester |
2.80 |
4.80 |
2.08 |
2.52 |
45mm & 60mm |
90/185 |
Doors 200/191 |
1 x 80/88 |
Hexham |
3.60 |
5.16 |
2.65 |
Doors 252/191 |
2 x 80/88 |
|||
Southwell |
3.80 |
5.60 |
2.77 |
|||||
Leicester |
4.50 |
5.50 |
||||||
Salisbury |
4.80 |
6.80 |
2.91 |
|||||
Warwick |
4.80 |
9.80 |
||||||
Hereford |
5.70 |
5.70 |
||||||
Brighton |
7.50 |
6.50 |
2.21 |
3.38 |
2 x Doors 252/191 |
Optional |
||
Worcester |
10.5 |
5.50 |
2.34 |
3.32 |
2 x 70/94 |
|||
Thirsk |
6.80 |
6.00 |
4.42 |
5.37 |
6 x 80/94 |
With double tongue and groove walls up to 60mm thick and solid timber securely bolted doors, the Salisbury timber garage is the ideal solution to prevent sticky fingers or just to keep your car in pristine condition. As a social room, the Salisbury tandem garage provides a cosy, homely atmosphere, a place for all your creature comforts, and as a home office, the Salisbury wooden garage presents a professional, spacious environment to bring that first class feel to the business. The Salisbury Garage would look perfect alongside a bespoke BBQ Hut, especially during those midge-infested summer evenings.
Like all Logspan Log cabins, the Salisbury Log Garage comes with a treated base frame so this protects the bottom of the cabin but the rest of the timber MUST be treated as soon as possible. As wood is natural material; it expands, moves and contracts all the time so it is important that the timber is treated properly as soon as possible. It is worth treating inside cabins as well before you fit it out.
Specifications
What's included in the package is everything you need to get going:
- A treated base frame on which the whole cabin is built
- All wall logs, each cut to size, length and with the interlocking notches already cut out
- Roof boards cut to length
- Skirting board
- Internal and External Trim
- Wind Boards for the gable ends
- Detailed instructions
- Screws of all lengths and sizes for each section of the job (this is a generic screw pack/you are likely to have some left over)
- Nails for putting down floor - (some like to use a brad gun instead of our nails to make 'secret nailing' in the tongue & groove boards easier)
- Roof covering - you can opt to order with or without the roof covering - This is selected at time of order
- If you have any trouble, we are available on the end of the phone to help out with build or with any queries.
- There is also most likely to be an extra wall board with notches cut out. This is there if there are any damages or missing parts. This extra log can be used to replace the broke or missing part in the unlikely circumstance. If you don't use it, it's a free piece of wood which could be used to make a shelf or a little step for the cabin.
The only thing you will need is your own tools and a flat, stable, level base. Information and advice on base work can be found here. It is also advisable to have at least 2 able bodies to build the cabin.