Vesta Lodge
Vesta Lodge Vesta Lodge Vesta Lodge Vesta Lodge Vesta Lodge Vesta Lodge Vesta Lodge Vesta Lodge Vesta Lodge

Vesta Lodge

Be the first to review this product

-- Please Select --
  • -- Please Select --
  • 60mm
  • 95mm + £11,634.00
  • Black + £1,215.00
  • Red + £1,215.00
  • Green + £1,215.00
  • None
  • Yes + £722.00
  • No
  • Yes + £3,157.00
  • No
- +
Free Nationwide Delivery

Quick Specification

  • Depth: 6.4
  • Length: 6.2 m
  • Log Thickness: 60 - 95mm
  • Width: 6.20m
  • Depth: 6.45m
  • Ridge Height: 4.61m
  • Eaves Height: 2.86m


The Vesta Lodge is a luxury log cabin house constructed from superior double (60mm log version) or triple (95mm log version) tongue and groove timber wall logs. The wood used throughout is slow growing Scandinavian Spruce. It has a large living area with cathedral ceiling, galley kitchen, bathroom and bedroom on the ground floor; and has a loft area measuring 20m2 which can be used as another bedroom. Its perfect for a Guest suite or residential Granny flat at the bottom of the garden.


The Vesta Lodge House is completely windproof due to the design of the interlocking corner joints. The roof and floor timbers are 20mm and the loft floor timbers are 28mm. The extra thickness of the wall logs make this a warm Log Cabin which can be used both summer and winter. It has double-glazed tilt 'n' turn opening windows. The door and window fittings have been imported from Germany, and are of the highest quality. This is a wood cabin with a lot of space, ideal for a holiday house or permanent accommodation. The living area is large and the galley kitchen completes a practical layout.



Specification - Vesta Log Cabin

Wall construction

60mm double or 95mm triple tongue & groove logs

Base construction

Tanalised bearers

Roof overhang
Height to Eaves
Height to Ridge

0.80 m
2.86 m
4.61 m


Double glazed units as standard


1 tilt'n'turn unit 70/94
3 tilt'n'turn units 100/94
1 tilt'n'turn unit 120/94
1 tilt'n'turn unit 150/94


2 single units 70/200
1 single unit 100/200
1 double unit 140/200


Heavy Duty 20 mm planed tongue & groove boards


20 mm (Ground) & 28mm (Loft) tongue and groove boards


Multi Sided
Roof Style
6.2 m
Timber Thickness
Windows & Doors
What's in the kit
What's in the box

What's included in the package is everything you need to get going:

- A treated base frame on which the whole cabin is built 
- All wall logs, each cut to size, length and with the interlocking notches already cut out 
- Floor & roof boards cut to length 
- Skirting board 
- Internal and External Trim 
- Wind Boards for the gable ends 
- Detailed instructions 
- Screws of all lengths and sizes for each section of the job (this is a generic screw pack/you are likely to have some left over) 
- Nails for putting down floor - (some like to use a brad gun instead of our nails to make 'secret nailing' in the tongue & groove boards easier) 
- Roof covering - you can opt to order with or without the roof covering - This is selected at time of order 
- If you have any trouble, we are available on the end of the phone to help out with build or with any queries. 
- There is also most likely to be an extra wall board with notches cut out. This is there if there are any damages or missing parts. This extra log can be used to replace the broke or missing part in the unlikely circumstance. If you don't use it, it's a free piece of wood which could be used to make a shelf or a little step for the cabin.

The only thing you will need is your own tools and a flat, stable, level base. Information and advice on base work can be found here. It is also advisable to have at least 2 able bodies to build the cabin.


Add Review