PRICES STARTING AT £2,018
5 STAR RATED
FREE NATIONWIDE DELIVERY*
BESPOKE SERVICE 
Laura Chalet with Annex
- Log Thickness: 45 - 95mm
- Width: 7.0m
- Depth: 4.3m
- Ridge Height: 3.84m
- Eaves Height: 2.34m
Overview
The Laura Chalet with Annex is a log cabin constructed from superior double tongue and groove wall logs, 20mm thick roof and floor timbers; this makes a very stable log cabin.
It has all the benefits of the Laura Chalet but with the added bonus of a room to the side which can be accessed via an external door. Externally it has a half glass door with a small porch, three (tilt n' turn) single windows and a double (tilt n' turn) window, all glazing comes double glazed as standard. Internally the cabin has 3 living areas on the ground floor and also a sleeping loft.
The Laura Chalet Log Cabin offers ideal holiday or temporary accommodation in a garden, and with the choice of 45mm, 60mm or 95mm thick walls there is one to suit every need. The kitchen with breakfast bar onto the living room makes a good sized open area and over the kitchen and toilet is a mezzanine sleeping loft. As with most of our log cabins the superb quality of double glazing and door and window fixings and locks is second to none. Now you can have a storage room at the side for bikes, boats or garden equipment.
|
Specification - Laura with Annex Log Cabin |
|
|
Wall construction |
45mm, 60mm double or 95mm triple tongue & groove logs |
|
Base construction |
Tanalised bearers |
|
Roof overhang |
0.80 m |
|
Glazing |
Double glazed units as standard |
|
Windows |
3 tilt'n'turn units 80/94 |
|
Door |
1 unit 70/196, 2 unit 90/196 both with double action lock |
|
Roof |
Heavy Duty 20 mm planed tongue & groove boards |
|
Floor |
20 mm (Ground) & 28mm (Loft) tongue and groove boards |
Specifications
What's included in the package is everything you need to get going:
- A treated base frame on which the whole cabin is built
- All wall logs, each cut to size, length and with the interlocking notches already cut out
- Floor & roof boards cut to length
- Skirting board
- Internal and External Trim
- Wind Boards for the gable ends
- Detailed instructions
- Screws of all lengths and sizes for each section of the job (this is a generic screw pack/you are likely to have some left over)
- Nails for putting down floor - (some like to use a brad gun instead of our nails to make 'secret nailing' in the tongue & groove boards easier)
- Roof covering - you can opt to order with or without the roof covering - This is selected at time of order
- If you have any trouble, we are available on the end of the phone to help out with build or with any queries.
- There is also most likely to be an extra wall board with notches cut out. This is there if there are any damages or missing parts. This extra log can be used to replace the broke or missing part in the unlikely circumstance. If you don't use it, it's a free piece of wood which could be used to make a shelf or a little step for the cabin.
The only thing you will need is your own tools and a flat, stable, level base. Information and advice on base work can be found here. It is also advisable to have at least 2 able bodies to build the cabin.