BBQ Huts - Base Air Pipe

10 Person Finman BBQ Hut Concrete Slab Foundation

Start making the foundation by putting a wooden stick in the middle of the assumed slab. Tie a 1.68m long string to the stick, by rotating it you can mark all the six angles with the help of 1.68m long measuring board. Make sure that the length of the diameter is 3.35m.

The air intake pipe can be made from 4'' to 6'' plumbers pipe, and can be built into the foundation. One end under the grill, the other will exit the into the open air (preferably at the side of the BBQ Hut with the prevailing wind).

11m2 Finman BBQ Hut Concrete Slab Foundation

Start making the foundation by putting a wooden stick in the middle of the assumed slab. Tie a 2.00m long string to the stick, by rotating it you can mark all the six angles with the help of 2.00m long measuring board. Make sure that the length of the diameter is 4.00m.

The air intake pipe can be made from 4'' to 6'' plumbers pipe, and can be built into the foundation. One end under the grill, the other will exit the into the open air (preferably at the side of the BBQ Hut with the prevailing wind).

17m2 Finman BBQ Hut Concrete Slab Foundation

Start making the foundation by putting a wooden stick in the middle of the assumed slab. Tie a 2.50m long string to the stick, by rotating it you can mark all the six angles with the help of 2.50m long measuring board. Make sure that the length of the diameter is 5.00m.

The air intake pipe can be made from 4'' to 6'' plumbers pipe, and can be built into the foundation. One end under the grill, the other will exit the into the open air (preferably at the side of the BBQ Hut with the prevailing wind).