Buildup of the Taiga BBQ Grill

Assembly Instructions for the Taiga BBQ Support

Parts List:

• Side plates, 3 pcs
• Shelves, 2 pcs
• Bottom plate, 1 pc
• Hooks, 4 pcs
• Bag of screws

1. Turn the fireplace (1) upside down
2. Fasten the 3 side plates (2) to the three brackets on the bottom of the fireplace loosely by hand
3. Slot the 2 shelves (3) into the grooves in the side plates
4. Fasten the perforated bottomrack to the side plates with bolts and nuts
5. Tighten the bolts on the bottom of the fireplace first, leaving the tightening of the bolts in the bottom-rack to last
6. Fasten the hooks (4 pcs) to the holes in side plates

Buildup of the Taiga BBQ Grill

1. Turn the fireplace upright. Thread the three vertical support bars through the three locating holes in the fireplace and secure each with one cotter pin above the fireplace.
2. Put the swing-out skillets onto the vertical support bars and adjust the height of the skillets with the cotter pins.
3. Put the adjustable damper in the centre of the fireplace and slide the ash pan into the ash box.